Sony Alpha Clip-In Filter MCUV

£60.00

The NEW Kase Sony Alpha Clip-in filters are an innovative and clever idea to allow you to use filters on any Sony Alpha Camera & Lens combination*, no matter how wide. Weighing in at only 3.3 grams per filter, these compact filters are made from B270 Optical glass and have our normal high quality nano coatings, so you know you can be assured of your image quality.

*Images for illustration purposes only.

In stock

SKU: 5060641972024 Category: GTIN: 5060641972024

Description

The NEW Kase Sony Alpha Clip-in filters are an innovative and clever idea to allow you to use filters on any Sony Alpha Camera & Lens combination*, no matter how wide. Weighing in at only 3.3 grams per filter, these compact filters are made from B270 Optical glass and have our normal high quality nano coatings, so you know you can be assured of your image quality.

Installation is simple**, and once installed the filters will give you extra protection of your camera sensor when you swap or change lenses out in the field.

Key Features

  • Outstanding Clarity – B270 Optical Glass
  • Lightweight and Compact – Only 3.3g per filter.
  • Easy to use – Simple Installation
  • Added Protection – Helps Protect your sensor

Compatibility

  • *Sony A9 II, A9, A7R IV, A7R III, A7R II, A7R, A7S II, A7S, A7 III, A7 II, A7 (whilst we are not currently aware of any lens restrictions, we can not guarantee all lenses will be compatible)

In The Box

  • 1 x Sony Clip-In Filter MCUV
  • 1 x Cotton Gasket
  • 2 x Rubber Finger Shields
  • 1 x Removal Tool
  • 1 x Plastic Case

Installation

Step 1:

When you insert the filter make sure you have the Kase lettering facing towards the camera.
1. You should see no lettering here.
2. Removal Slot

Step 2:

Before you insert the filter please make sure that you protect the open camera sensor, please do so in a clean and wind protected environment.

Step 3:

Insert the filter by placing the tab (1) into slot (3) on the camera at a 45 degree angle.

Step 4:

Push the filter into place until it securely clicks.
to remove the filter, please use the supplied tool to lever out the filter using the slot (2) in the filter.

In normal use you do not need to fit the cotton gasket, but if you are planning on doing light sensitive long exposures using the ND filters then the extra gasket will help prevent light leak.

Step 1:

Supplied is a gasket, this will help provide a light seal for Long exposure work.

This is placed behind the Clip-In filters.

Step 2:

Carefully insert the gasket as show here, extreme care is taken when working so close with your camera sensor.

** Before installing, please make sure you are fully aware of any risks/issue that might arise if you do not protect your sensor on installation and use.
Please make sure that you are not going to invalidate your
warranty, and that you fully understand that you take full responsibility for using  and installing these filters.

Product Video